佛山伟力塑料机械有限公司

产品及产能制品容积（ML）Max.Volume of product(ML)                                          2000-5000制品大高度（MM） Max.Height of Product(MM)350适合胚管壁厚（MM） Wall Thickness of Preform (MM)                                            1～4适合胚管大高度（MM） Max Height of Preform(MM)                                          180制品大直径（MM）Max.Diameter of Product(MM)                                              Φ190生产能力（瓶/小时）Production Capacity (PCS/HR)                                             1000～1100胚管加热装置胚管座数（个） Mo.of Preform Holder(PCS)                                                          122适合胚管口内径（MM）Max.Neck Diameter of Preform                                               φ30～φ45远红外线光管排列(支×区×道)  （分道加温）Arrangement of Infra-Red Tubes(PCSxZONES)                                          10×5×2实际加热功率(KW)Average Power Consumption(KW)                                                        30拉吹装置模具腔数No.of Mould Cavity                                                     2模具标准厚度(MM)Standard Mould Thickness(MM)260±0.5模具标准宽度(MM)Standard Mould Width(MM)440开模大行程MM) Max.Span Between Opening Moulds(MM)                                                    230模腔標準间距Standard Span Between Mould Cavities(MM)220±0.05额定动作气压(Mpa)  Working Air  Pressure(Mpa)                                                    0.8～1大吹气气压(Mpa)            Blowing Air Pressure(Mpa)                                    3要求空压机排气量(M3/MIN)   （低压/高压） Volume of Low/High Pressure Air Compressor(M3/MIN)                                               1.8/3机台外型尺长×宽×高（MM） （含自动上下胚尺寸） Dimensions(Length×Width×Height)(MM)                                  5100×2500×2000主机重量（KG）Weight4